Fully Automatic 5 Gallon Filling Machine 450BPH 1 Filling Valves
For Mineral Water
5 gallon water filling Machine advantage:
1. This filling line specially produces 3&5 gallons barreled
2. This series barreled filling production line integrates bottle
washer, filler and sealer into one unit.
3. In order to achieve the purpose of washing and sterilizing,
bottle washer adopts multiple liquid injections washing and
disinfectant spray, and washing solution can be used circularly.
The sealer can seal bottle caps automatically.
4. This filling line equips with water spraying device to sterilize
caps of bottles in order to ensure those caps are aseptic and
5. This line also can automatically carry out bottle washing,
sterilizing, filling, capping, counting and products discharging.
6. It has features of complete functional, novel design, and high
degree of automation. It is a new kind of barreled water
auto-producing line, which integrates mechanism, electricity and
pneumatics technologies together.
5 gallon water filling Machin Characteristic:
1. QGF type bottled production line specialize produce 3 gallons
and 5 gallons bottled water.
2. The machine with all the function—washing , filling , screwing ,
it is an ideal equipment for producing mineral water , distilled
water , pure water.
3. All the machine is made of stainless steel , anticorrosive ,
easy to clear. The main electrical elements use the SIEMENS,OMRON .
Carrier gas system use the Air TAC .
4. The machine has small and exquisite structure , occupy a little
space in the working room , high efficient working , stable and
reliable, high automation .
5. All the operation just need 2 people.
5 gallon water filling Machine Main technical parameters:
|Model||Capacity production||power||Overall dimension|
|QGF-200||200 b/h||3.3 kw||3000*1350*1560mm|
|QGF-300||300 b/h||4.5 kw||3500*1400*1560mm|
|QGF-600||600 b/h||5.7 kw||4500*3000*1560mm|
|QGF-900||900 b/h||6.5 kw||5100*3600*1560mm|
|QGF-1200||1200 b/h||8 kw||5100*1400*1560mm|
water treatment Introduction
Pure Water Treatment line flow chart:
Raw water ->Raw water tank -> Raw water pump -> Quartz
sand filter -> Active carbon filter-> High pressure pump
->Security filter -> RO equipment->Pure water tank
Main equipment included the pre-treatment ,RO system and
(A).Pre-treatment are included sand filter ,carbon filter
,softener(option) and security filter .
1.Sand filter: A laminated filter is provided to prevent sand,
flocculent and colloid entering into membrane element. Its basic
filter element is formed by quartzes sand and anthracite.
2. Active carbon filter: This is provided to absorb organic
materials, residual chlorine and other injurants, thus it can
reduce the effluent COD and keep SDI under and CL2 under 0.1 mg. L.
3. Softening system: This system is to prevent begrime the membrane
by ion of Ca and Mg.
4. Precision filter (micro filter) ,PP filter of 5um is installed
to prevent fine particulate entering the high lift pump and RO
(B).RO systemis included that booster pump,membrane and membrane
housing, electronic Control System .
It cut out colloids, bacteria, virus and other impurities, and keep
output water conductivity below 5um/cm.
(C). Water Sterilizer often refers to Ozonge Generator and U.V Ray
sterilier, which used to kill the germs in water.
(D).Pure water tank: When the pure water tank is at high water
level, the RO machine will automatically come to stop, when the
pure water tank is at low water level, the RO system will run